The headlight washers automatically turn on every fifth time the windshield washer is turned on.
If you want to turn on the headlight washers immediately, press the wiper and washer control lever twice in succession.
Note:
If air gets into the headlight washer tubes (e.g. when filling the washer reservoir for the first time on a new vehicle or after filling an empty reservoir while the vehicle is in service), fluid will not be applied to the headlight lenses even when the control lever is pressed. In this case, do the following:
1. Start the engine.
2. Turn on the headlights.
3. Operate the headlight washers several times by double-pressing the wiper control lever until fluid begins to flow onto the headlight lenses.