Checking the coolant level

Attention. Observe safety measures when working with the engine cooling system.

Note:

• If there is a symbol on or near the cooling system cap «FL22», FL22 coolant must be used.
• Coolant FL22 is supplied as a ready solution. Additional dilution of such a liquid before filling the cooling system is not required.

1. Remove the cooling system cover.

2. Make sure the coolant is filled to the top of the radiator filler neck. If the coolant level is low, add it to the correct level.

3. Make sure that the engine coolant level in the expansion tank is between the F and L marks. If the coolant level is below the L mark, add coolant.