Front wheel drive versions (2WD):
1. ABS wheel sensor.
2. Brake hose clamp.
3. Brake caliper assembly.
4. Brake disc.
5. Wheel hub bolts.
6. Wheel hub.
7. Dust cover.
8. Nut of the lower part of the anti-roll bar.
9. Outer bolt of the lower arm of the rear suspension.
10. Coil spring rear suspension.
11. Rear shock absorber lower bolt.
12. Rear tie rod outer bolt.
13. A bolt of fastening of longitudinal draft of a back suspension bracket.
14. Outer bolt of the upper arm of the rear suspension.
15. Pin.
16. Wheel hub bolts.
17. Front trunnion bushing.
18. Rear trunnion bushing.
1. Drive shaft lock nut.
2. ABS wheel sensor.
3. Brake hose clamp.
4. Brake caliper assembly.
5. Brake disc.
6. Wheel hub bolts.
7. Wheel hub.
8. Dust cover.
9. Lower anti-roll bar nut.
10. Outer bolt of the lower arm of the rear suspension.
11. Coil spring rear suspension.
12. Rear shock absorber lower bolt.
13. Rear tie rod outer bolt.
14. A bolt of fastening of longitudinal draft of a back suspension bracket.
15. Outer bolt of the upper arm of the rear suspension.
16. Pin.
17. Wheel hub bolts.
18. Front trunnion bushing.
19. Rear trunnion bushing.
Note:
: replace the part with a new one after each removal.
: use a special tool or attachments.
: apply lubricant.