Front suspension settings
Convergence — 0±3.0 mm
Camber — +0°20'±30 Longitudinal inclination of kingpin — +1°40'±45'
Rear suspension settings
Convergence — 0±3.0 mm
Tire pressure
All models with 14" wheels
Normal and fully loaded
- Front - 2.0 bar
- Rear - 2.0 bar
All models with 13" wheels
Average load
- Front - 2.0 bar
- Rear - 2.0 bar
Full load
- Front - 2.1 bar
- Rear - 1.9 bar
Tightening torques, Nm
Front suspension
Drive shaft locknut - 160-240
Top rack mounting nuts - 23-30
Strut piston rod nut - 65-82
Lower rack nuts and bolts - 95-119
Bolt and nut of the ball joint to the steering knuckle - 44-55
Mounting bolts and nuts of the lower suspension arm - 95-119
Stabilizer bar suspension bolts - 44-55
Rear suspension
Upper strut mounting nuts - 22-27
Rack rod nut - 56-82
Lower mounting bolts and nuts of the shock absorber strut - 95-119
Side Pull Coupling Bolt - 61-75
Lateral thrust - cross member - 95-119
Lateral thrust - rear hub axle - 95-119
Longitudinal balancer - body - 60-75
Longitudinal balancer - rear hub axle - 55-69
Longitudinal balancer - anti-roll bar - 32-47