The location of the windshield wiper assemblies in the assembly
1. Wiper blade; 2. Nut and wiper arm; 3. Hood; 4. Maintenance cover; 5. Rod bolts and washers assy (5); 6. Thrust assembly; 7. Wiper motor bolt; 8. Wiper motor
1. Disconnect the negative cable from the battery.
2. Remove the wiper arms, unscrew the nuts and remove them from the slots.
3. Remove the hood and service access cover.
4. Remove the linkage and engine mounting bolts, disconnect the electrical connector, and disengage the engine from the linkage as shown in the accompanying illustrations.
Separating the wiper motor from the rod with a screwdriver | 
Windshield Wiper Adjustment |
5. Remove draft from the car through openings for access in a body.
6. Reassemble in reverse order, making sure that the height of the holder is adjusted as shown in the accompanying illustration.