Generator Installation Details
1. Adjustment bolt; 2. Clamp connection B; 3. Connection of clamps L and P; 4. Drive belt; 5. Coupling bolt and nut
Removing
1. Disconnect the negative battery cable.
2. Loosen the adjustment screw.
3. Disconnect the wire harness from the bracket.
4. Remove the drive belt.
5. Turn off a coupling bolt and a nut, remove the generator from the engine.
Installation
6. Install alternator, pinch bolt and nut. Install the adjusting bolt.
7. Install drive belt and adjust tension (Section 1).
8. Plug in the generator connector.
9. Connect the negative battery cable.