Inspection
1. Inspect the bracket by having an assistant move the transmission down and up. If the bracket rubber pad separates from the transmission, or if the transmission moves up but does not move down, replace the bracket assembly.
Replacement
2. Disconnect the negative battery cable.
3. Support the transmission with a jack.
4. Remove the bolts securing the transmission bracket to the engine/transmission.
5. Turn off nuts of fastening of an arm to a body and remove an arm.
6. Install the new bracket in place and insert the bracket-to-engine/transmission bolts. Tighten the bolts with the tightening force specified in the Specifications.
7. Establish nuts of fastening of an arm to a body and clamp them with the tightening force regulated by Specifications.
8. Remove the jack and connect the negative battery cable.