- Limit value - 0.5 mm
The gap between the gear shift fork and the synchronizer is 0.20-0.46 mm
- Limit value - 0.5 mm
The gap between the blocking ring synchron. and gear - 1.5 mm
- Limit value - 0.80 mm
Gear clearances
1st gear gear - 0.05-0.53 mm
- Limit value - 0.6 mm
Gear 2nd gear - 0.5-1.0 mm
- Limit value - 1.0 mm
Gear 3rd gear - 0.05-0.43 mm
- Limit value - 0.5 mm
4th gear gear - 0.25-0.35 mm
- Limit value 0.5 mm
Input shaft bearing preload - 0.5-2.0 cm / kg
Differential side bearing preload - 0.8 -1.8 cm / kg
Satellite play - 0.1 mm
Tightening torques, Nm
Rear crossbar:
- Front nuts and bolts - 44-55
- Rear bolt - 95-118
Lower ball joint bolt - 44-55
Transmission:
- Body bolts - 37-55
- Backstage lock bolt - 12-16
- Gearbox shaft locknuts - 130-210
- Guide bolt - 9-14
- Rear cover bolt - 9-11
- Reverse Shaft Retaining Bolt - 21-31
Bolts of fastening of transmission to the engine — 91-119
Bolts of fastening of an arm of transmission to the engine — 54
Bolts and nuts for fastening the trans bracket to the transmission - 38-54
Nuts for sprinkling the transmission bracket to the body - 44-55