Radiator Fan Intermediate Relay

Disconnect the connector from the thermal switch and check that the radiator fan turns on when the key in the ignition switch is turned to «ON». If the fan turns on, then the relay is good.



If the fan does not turn on, then the cause may be an open circuit or a blown fuse. If the electrical circuit and the insert are OK, replace the relay by disconnecting the connector and unscrewing the screws (pic. 5.6).

Attention! It is not allowed to disconnect the connector from the thermal switch if the key in the ignition switch is in the position «ON», to prevent the radiator fan from turning on automatically.