Removing
Remove the camshaft timing belt cover and toothed belt.
Remove the timing belt pulley from the camshaft.
Remove the bolts and use a screwdriver to carefully separate the rear toothed belt cover from the cylinder head.
Installation
Thoroughly clean the mating surfaces of the gasket material.
Pic. 3.14. Installation location of the bolt for fastening the rear casing of the toothed belt
Install the rear toothed belt cover with a new gasket and screw in the bolts (pic. 3.14). Tighten the mounting bolts to the required torque.
Further installation is carried out in the reverse order of removal.