Removal and installation
1. Lower the glass completely. Disconnect the negative battery cable.
2. Remove the door trim panel and waterproof panel.
3. Disconnect all connectors and wires that interfere with the removal of the door.
4. Remove the rubber seal from the door.
5. Knock out the locking pin (indicated by an arrow).
6. Mark the installation position of the hinges on the door, unscrew the fixing bolts (indicated by arrows) and remove the door.
7. Installation is carried out in the reverse order of removal.
Adjustment
1. To adjust the position of the door, loosen the mounting bolts and reposition the door as needed.
2. Adjust the position of the latch by unscrewing the fixing screws and sliding the latch as needed.