Removing
1. Disconnect the negative battery cable.
2. Drain the coolant.
3. Remove the intake manifold air intake hose.
4. Remove the resonator.
5. Disconnect the accelerator cable and throttle cable from the intake manifold.
6. Disconnect the wiring harness, hoses and cables from the intake manifold.
7. Remove the air intake and throttle cover.
8. Remove the fuel line.
9. Disconnect the hoses and wires from the fuel valve and remove the valve.
10. Raise and secure the front of the vehicle. Remove the intake manifold bracket.
11. Unscrew the manifold bolts.
12. Lower the car.
13. Remove the manifold.
Installation
1. Thoroughly clean the mating surfaces of the manifold and cylinder head. If the manifold gasket is leaking, contact a specialist.
2. Install a new gasket, install the manifold and insert the bolts.
3. Tighten the bolts in three steps.
4. Install remaining parts and fill with coolant.
5. Check engine operation.