Car automatic transmission Mazda 626 (6)

Automatic transmission technical data
Connection tightening torques, N·m Selector position sensor bolts - 8-10 Bots and nuts of fastening of a basic beam of transmission ( see fig. 8.23 ): A (nuts) — 75-104...

General information about automatic transmission
The vehicles described in this manual may be equipped with a 5-speed manual transmission or a 4-speed automatic hydromechanical transmission. This chapter provides...

Automatic transmission diagnostics — basic information
Note: Automatic transmission malfunctions can occur for the following five main reasons: poor engine operation, improper adjustment, hydraulic system malfunction,...

Selector lever — removal and installation
Attention! The models described in this manual are equipped with airbags. When working in the cushion area, always turn them off ( see chapter 12 ) to avoid accidental...

Selector cable — removal, installation and adjustment
Attention! The models described in this manual are equipped with airbags. When working in the cushion area, always turn them off ( see chapter 12 ) to avoid accidental...

Locking system — general information, checking and replacing elements
Attention! The models described in this manual are equipped with airbags. When working in the cushion area, always turn them off ( see chapter 12 ) to avoid accidental...

Selector Position Sensor — Check and Replace
Examination 1. Access to the sensor for testing is possible from the engine compartment. 2. Disconnect the sensor electrical connector (pic. 6.2). Note The sensor on...

Transmission cuffs — replacement
1. Leaks often occur due to worn cuffs. Replacement of cuffs is rather simple as for this purpose it is not required to remove transmission from the car. 2. The cuffs...

Removal and installation of automatic transmission
Removing 1. Disconnect the wires from the battery (first negative, then positive). Caution: If your vehicle's audio system has an anti-theft protection, make sure you...