Wheel and tire sizes / tire pressure Attention! Technology is constantly evolving. It may be that older models may have different tire pressures. Therefore, it is recommended to find out the latest data in...
Drive designations Example 5J x 13: 5 - rim width in inches J - letter designation of the height and contour of the side flange of the rim x - designation of a single-component deep rim 13...
Tire designations Example: 195 - tire width in mm /70 - ratio of height to width (tire cross-sectional height is 70% of the width). If there is no separate information about the ratio of...
Wheel replacement When changing wheels, it is not recommended to change the direction of rotation of the tire, since lapping is achieved by very significant tire wear. If the front tires...
Tire care rules Tires have a so-called "memory" and careless handling—such as driving quickly or frequently over obstacles—will cause them to fail prematurely. Tire cleaning If...
Wheel balancing The wheels fitted as standard are balanced at the factory. Balancing is necessary to compensate for uneven weight distribution and material inhomogeneity. During...
Anti-skid chains The use of snow chains is only permitted on the driving (front) wheels. Install only small link chains of the appropriate size. Every 500-1000 meters the chains must be...
Spare wheel When using a compact spare wheel, the following rules must be observed: The spare wheel can be mounted front and rear. The spare wheel is intended for emergency...
Tire wear On the front wheels, slightly more wear on the side of the working surface in relation to the middle is normal, and due to the inclination of the carriageway, wear on...