To turn on, press the key «CRUISE MAIN» on the instrument panel.
To turn off, press the key again.
Setting the desired vehicle speed
1. Accelerate the car to the desired speed (at least 40 km/h).
2. Press the key quickly «SET» at the end of the light switch. Do not keep the key pressed.
3. Release the gas pedal. The set speed will be kept constant.
Increasing vehicle speed
1. Press the key «SET» and keep it pressed. The car will accelerate uniformly.
2. Release the key when the desired speed is reached.
Vehicle speed reduction
1. Set the button «COAST-RESUME» on the wiper and washer switch to position «COAST» and hold in this position.
2. The speed will slowly decrease. Release the button when the desired speed is reached. After that, the newly set speed will be maintained constant.
Shutdown
1. Press the key «CRUISE MAIN», to disable constant speed mode.
2. Lightly depress the brake or clutch pedal.
3. Install shift lever (on automatic transmission) into position «N».
4. The constant speed switch will automatically turn off when the vehicle speed is less than 15 km/h below the set speed.
Restart at speeds above 40 km/h
1. To turn on the last set speed again, turn the button «COAST-RESUME» right to position «RESUME» release the button. The vehicle will automatically accelerate to the last set speed. At speeds below 40 km/h, the constant speed switch is turned off until the speed is above 40 km/h again. Then turn the button again «COAST-RESUME» right and release it.
2. The vehicle will automatically accelerate to the previously set speed, and this speed will be kept constant.
Note. When driving uphill or downhill heavily in constant speed mode, the vehicle speed may deviate slightly.
Attention! Do not use constant speed mode in heavy traffic that does not have a constant speed, and on winding, icy, wet, or slippery roads.