Vehicle engine power system Mazda 323 (BG)

Description of the power system
The fuel system includes a fuel tank with a built-in fuel level sensor, fuel lines, a fuel filter, a fuel pump and a carburetor or fuel injection system with an air...

Rules for cleanliness when working with the power system
When working on the power supply system, the following rules of cleanliness should be carefully observed: Thoroughly clean the connection points and their surroundings...

Removing and installing / checking the sensor in the fuel tank
The level sensor is screwed into the top of the fuel tank. When the fuel level drops in the sensor, the float drops. In this case, due to the sliding contact on the...

Removal and installation of the fuel tank
Fuel tank (injection engine) 1 - fuel pump cover; 2 - fuel pump plug; 3 - fuel hoses; 4 - fuel pump with level sensor; 5 - tank ventilation hoses; 6 - filler hose; 7 -...

Removal and installation of the fuel pump
On vehicles with an injection engine, the fuel pump, together with the fuel level sensor, is located on a holder in the fuel tank. Attention! When removing the fuel...

Removal and installation / check of the fuel pump
Carbureted engine The fuel pump is screwed onto the cylinder head. It is actuated via a lever directly from the camshaft. It is not necessary to remove the pump to check...

Removal and installation of the air filter
Carbureted engine Removing 1. Loosen the fastening brackets and unscrew the wing nut. Remove air filter cover. 2. Remove the filter element. 3. Disconnect the preheating...