Car engine ignition system Mazda 323 (BG)

Description of the ignition system
The ignition system generates a spark in each cylinder of the engine at the required time. The spark ignites the air/fuel mixture. In the ignition coil, the battery...

Safety measures when working with an electronic ignition system
In the MAZDA 323 electronic ignition system, the ignition voltage can reach 30 kV. Under adverse circumstances, such as humidity in the engine compartment, voltage peaks...

Checking the ignition coil
The ignition coil is located in the engine compartment in front of the left suspension strut cover. Spark test 1. The spark test can only be carried out on vehicles...

Checking the ignition cable
1. Too much ignition cable resistance can cause starting difficulties and misfiring. 2. Turn off the ignition. 3. Remove the ignition cable, to do this, remove the plugs...

Checking and adjusting the ignition timing
Normally, the ignition timing does not change due to mechanical wear. However, for safety reasons, MAZDA has prescribed a regular check of the ignition timing as part of...

Removal and installation of the distributor of ignition
The ignition distributor is driven directly from the camshaft. It is located on the cylinder head on the flywheel side. Removing 1. Disconnect the ground cable from the...

Spark plug
The spark plug consists of a central electrode, an insulator with a housing and a ground electrode. The central electrode is installed gas-tight in the insulator. The...

Candles for Mazda 323
Attention! Since newer models with the same engine power may be equipped with modified ignition systems, it is recommended, for safety reasons, before purchasing spark...