Remove the inner handle.
Remove the rear door speaker.
Disconnect the power window motor connector and the door lock actuator auto connector.
Remove the tailgate harness from the tailgate assembly.
Turn away bolts.
Remove the door lock actuator hook from the door block.
Pic. 8.30. Removing the front door block
Pull the rear door assembly slightly towards you without letting the power window adjuster snap into place, remove the assembly from the door (pic. 8.30).
Remove the inner handle cable and the door lock button cable from the hole.
Pic. 8.31. Removing the regulator knob and window lifter
If your vehicle is equipped with a power window system, remove the power window motor and power window regulator from the door assembly. If the vehicle is not equipped with a power window system, remove the control knob and power window (pic. 8.31).
Install in the reverse order of removal.