Check the clearance in the front wheel bearings and adjust if necessary.
Check tire and wheel runout.
Check ball joints and steering gear for excessive play.
Rock the car to check the operation of the shock absorbers.
Note. The vehicle must be unloaded. Fill the fuel tank completely and place it on a level, level surface.
Engine coolant and engine oil levels should be correct.
The spare wheel, jack and tools are in their original places.
Measure the height from the center of the wheel to the edge of the fender.
The difference between the measurement result on the left and on the right must not exceed 10 mm.
Pic. 4.1. Scheme of preliminary check of wheel alignment