Maintenance of the remote control

If the system does not respond to pressing the buttons on the remote control and the built-in indicator does not light up, the battery of the remote control may be dead. Replace the battery to restore the functionality of the remote control.

Insert the battery into the remote control so that the positive pole marking (+) was facing down. If the battery is installed incorrectly, electrolyte may leak. When replacing the battery, be careful not to bend the electrical contacts and avoid oil contamination. Be careful not to get dirt into the remote control case. This may damage the remote control. If the replacement is incorrect, there is a danger of the battery exploding. When replacing, use only CR1620 or equivalent batteries. When disposing of used batteries, observe the following rules:

• isolate the positive and negative poles of the battery with cellophane or electrical tape;
• do not disassemble the batteries;
• do not throw batteries into fire or water;
• Do not deform or crush batteries.