Malfunctions in the way of the car Mazda 3 (BK)

Spare wheel and tool kit
The spare wheel and the tool in the stowed position are in the places shown in figures 1.159 and 1.160. Pic. 1.159. The location of the spare wheel and tool kit in cars...

Transportable jack
Pic. 1.161. Removing the jack In order to remove the jack, follow the steps shown in Figure 1.161. 1. Turn the lock knob and remove the cover. 2. Turn the T-handle...

Spare wheel
Mazda cars can be equipped with both a small-sized spare wheel and a spare wheel unified with the rest of the car's wheels. Spare wheel, unified with the rest of the car...

Replacing a defective wheel
Note. The following signs may indicate damage to the wheel. - Increased resistance to steering wheel rotation. - Increased vehicle vibration. - Pulling the car to the...

Dismantling a defective wheel
1. If decorative caps are installed on the wheels of the car, remove the cap by pressing on its edge with the pointed end of the wheel wrench handle. Pic. 1.164. Loose...

Spare wheel installation
1. Clean the mating surfaces on the wheel disk and hub, as well as the studs, from dirt with a rag. 2. Install the spare wheel. 3. Screw the wheel nuts onto the studs...

Engine overheating
If the thermometer indicates that the coolant temperature is too high or the engine does not develop full power, or the engine is accompanied by strong knocking or...

Instructions for starting the engine when the air-fuel mixture is too rich (gasoline engine)
If the engine does not start, then the possible cause is an over-rich air-fuel mixture (too much fuel has entered the combustion chambers of the engine) and getting fuel...

Starting the engine from an auxiliary battery
Starting the engine with a booster battery can be dangerous if you don't follow the instructions. Therefore, follow the description of all operations exactly. If you are...

Car evacuation
We recommend that you use only specialized roadside assistance services that belong to authorized Mazda dealers or operate independently to tow the vehicle. To avoid...

Installing the towing eyelet in front of the vehicle
1. Remove the towing eye and wheel wrench from the luggage compartment. Pic. 1.170. Removing the plug from the front bumper 2. To prevent damage to the paintwork of the...