Installation of support No. 1

Tighten bolt A of the engine mount bracket with a tightening torque of 93.1–116.6 Nm.

Tighten the bolt B of the engine support bracket with a tightening torque of 93.1–116.6 Nm.

Tighten the coupling bolt of the engine support bracket No. 1 with a tightening torque of 85.3–116.6 Nm.



Tighten the coupling bolt B on the body with a tightening torque of 93.1–116.6 Nm (pic. 2.98).

Install other components in the reverse order of removal.

Start the engine. Inspect for engine oil, coolant, transmission oil and fuel leaks. Check ignition timing, idle speed and mixture.

Carry out a test drive.