Car windscreen wipers and washers Mazda 6 (GG)

General information about windshield wipers and washer
Windshield wiper The windshield wiper system consists of a gearmotor, linkage, wiper arms with brushes and a switch. The windshield wiper mechanism, equipped with a...

Removal and installation of the electric motor of a screen wiper of a windscreen
Disconnect the negative cable from the battery. Remove the windshield wiper with brushes. Remove the front grille. Pic. 7.56. Removing the windshield wiper motor: 1 -...

Dismantling and assembly of the electric motor of a screen wiper of a windscreen
Disconnect the windshield wiper link from the wiper motor. Remove the wiper rod. Pic. 7.57. Disassembly of the windshield wiper motor: 1 - wiper; 2 - bolt; 3 -...

Checking the windshield wiper motor
Disconnect the windshield wiper motor connector. Apply voltage from the positive battery terminal to terminal E or D; connect terminal B to body ground, check the...

Removal and installation of the windshield wiper arm with a brush
Pic. 7.59. Removing the windshield wiper arm with brush: 1 - cover; 2 - nut; 3 - windshield wiper; 4 - windshield wiper brush; 5 - brush Disassemble in the order shown...

Windscreen wiper arm adjustment with brushes
Turn on the windshield wiper motor and return the wiper arms to their original position. Pic. 7.61. Windscreen wiper arm adjustment with brushes Install the windshield...

Removal and installation of the windshield washer reservoir
Disconnect the negative cable from the battery. Pic. 7.62. Removing the washer reservoir: 1 - bolt; 2 - connector; 3 - washer hose; 4 - clamp; 5 – a hose of a cleaner of...

Removal and installation of the windshield washer motor
Disconnect the negative cable from the battery. Remove the washer reservoir. Remove the windshield washer motor. Pic. 7.63. Removing the windshield washer motor: 1 -...

Checking the windshield washer motor
Disconnect the negative cable from the battery. Remove the washer reservoir. Pic. 7.64. Windshield washer motor test circuit Apply voltage from battery positive to motor...

Removing and installing washer fluid level sensor
Disconnect the negative cable from the battery. Remove the washer reservoir. Remove the headlight cleaner motor. Disconnect the fluid level sensor connector. Pic. 7.65....

Removal and installation of a windshield washer jet
Remove the hood insulator. Remove the washer hose from the washer jet fitting. Pic. 7.66. Removing the washer jet Squeeze the windshield washer jet clips (pic. 7.66)....

Cleaning the windshield washer jet
Pic. 7.67. Washer jet cleaning Clean the washer jet with a needle or similar object by moving it back and forth (pic. 7.67). If the jet becomes clogged again after...

Removal and installation of a windshield washer hose
Remove the hood insulator. Partially remove the right mudguard. Disconnect the clamp and connecting tube. Remove the windshield washer hose. Install in the reverse order...

Removal and installation of the electric motor of a washer of back glass
Disconnect the negative cable from the battery. Remove the washer reservoir. Pic. 7.69. Removing the rear window washer motor: 1 - rear window washer motor; 2 - sealing...

Removal and installation of the lever of a back screen wiper with a brush
Remove the lever cover. Pic. 7.70. Removing the washer reservoir: 1 - cover; 2 - nut; 3 – the lever of a cleaner of back glass; 4 - holder of the rear window cleaner...

Rear wiper arm adjustment with brush
Operate the rear window wiper motor and return the wiper arm to its original position. Pic. 7.71. Adjustment diagram for rear wiper arm with brush Install the rear...

Removal and installation of a jet of a washer of back glass
Disconnect the negative cable from the battery. Remove the top tailgate trim. Remove the rear window washer hose from the washer jet fitting. Squeeze the clamps of the...

Rear window washer jet adjustment
Pic. 7.73. Rear window washer jet adjustment diagram Insert the needle into the hole in the rear window washer jet and adjust the direction of the nozzle, as shown in...

Removal and installation of the headlamp cleaner motor
Disconnect the negative cable from the battery. Remove the washer reservoir. Remove the washer fluid level sensor. Disconnect the connector. Unscrew the mounting bolt...