General information about on-board electrical equipment When checking the details of electrical equipment, a motorist should be aware of what is meant by voltage, current and resistance. Voltage is measured in volts (IN),...
Measuring instruments For measurements on the electrical equipment of a car, there are combined measuring instruments, also called multimeters or testers. They combine a voltmeter to measure...
Connection of additional current consumers 1. Band clamp; 2. Insulating tape; 3. Fastening tape; 4. Ribbon (collar) fastenings with fastening in a hole; 5. Protective tube (cambric); 6. Self-adhesive foam tape....
Replacing fuses — general information To prevent short circuits and overloads in the wires and current consumers of the electrical equipment system, individual circuits are protected by fuses. Fuses with...
Location of fuses and relays Note: The turn signal relay is plugged into the switch on the steering column. Main fuse box in the cabin Location of the fuses in the Ford Fiesta model Relay location...
Removal and installation of the instrument panel Instruments are combined into a common instrument panel. After removing the instrument panel, you can remove the instruments and lighting lamps. This chapter also...
Removal and installation of devices and control lamps Removing Remove instrument panel. Rotate two lamps to the left (1) with cartridges and take them out. Unhook the four fastening tabs (2) and remove the protective glass....
Removal and installation of the steering column switch Removing Disconnect the negative cable from the battery. Attention: This will erase the data from the electronic memory blocks, including the security codes of the...
Removal and installation of switches on the panel Removing Disconnect the negative cable from the battery. Attention: This will erase the data from the electronic memory blocks, in particular, the security codes of the...
Removal and installation of the switch Removing Disconnect the negative cable from the battery with the ignition off. Attention: This will erase the data from the electronic memory blocks, in particular the...